Unilite UK-F2 375 Lumen Focus Torch

UniLite UK-F2 High Powered CREE 375 Lumen LED Aliuminium Focus Torch 

The UK-F2 is the first focusing hand torch from Unilite. Featuring a white Cree LED, the UK-F2 delivers a maximum output of 375 lumens, with a run-time of 2 hours from a fresh set of 2 x AA alkaline batteries.

 Product Features

• Spot to flood focusing
• Tactical rubberised micro switch
• Lanyard included

Operational Modes

• Turbo: 375 lumens; 2 hours run-time; 175 m beam range
• High: 260 lumens; 5 hours run-time; 145 m beam range
• Mid: 130 lumens; 13 hours run-time; 105 m beam range
• Low: 30 lumens; 60 hours run-time; 50 m beam range
• Strobe (8 Hz): 11 hours run-time

• Type: Focusable hand held LED torch
• Operating Modes: Turbo / High / Mid / Low / Strobe (8 Hz)
• Luminous Flux: Up to 375 lumens
• Lamp Type: Cree white LED
• Beam Range: Up to 175 m
• Focus: Spot to flood
• Batteries Required: 2 x AA alkaline (included)
• Run Time: Up to 60 hours (low)
• Overall Length: 158 mm
• Diameter: 29 mm
• Weight: 150 grams (including battery)
• Body Colour: Black
• Body Material: Hard anodised die cast aluminium
• Switch Type: End cap micro switch
• Impact Resistance: 1 m
• Environmental: Waterproof and dust resistant to IP66 standard
• Regulatory Compliance: CE / RoHS

Packaging and Contents

• Supplied in retail packaging and includes:
• Unilite UK-F2 LED torch x 1
• Lanyard x 1
• Duracell AA alkaline battery x 2
• Manual x 1

The convex lens enables the beam to project a maximum of 175 metres beam range when focused into a spot by sliding the head of the torch forwards. Pulling the head backwards will change the focus to a flood beam for closer wide illumination.

Four brightness levels as well as a a 8 Hz strobe setting are available. Quick presses of the tail switch cycles through the modes in the order of high, mid, low, strobe and off. If in any mode longer than 10 seconds, the next press will turn the torch off.

The body is made from die cast aluminium and has a drop resistance of 1 metre. The UK-F2 is dust and water resistant to IP66 standards.